100P ISUZU road sweeper truck function introduce

ISUZU road sweeper truck main functions introduction

ISUZU road sweeper truck garbage shall be collected by ISUZU sweep truck suction sweeping and mixing, and the pavement shall be cleaned by wet dust removal, electro-hydraulic control and hydraulic tipping unloading.

The ISUZU road sweeper truck auxiliary engine is specially used to drive the fan and hydraulic system to ensure continuous operation during driving and the continuity of cleaning process.

adopt the structural layout of “middle four sweep disk + spray dust reduction device + central baffle + rear suction nozzle”, so that the sand and gravel in the cleaning process are not spatter dust. This layout facilitates the adjustment and maintenance of the cleaning device and sucker, and the vehicle passing performance is good during the transition operation.

ISUZU road sweeper truck Function

The ISUZU road sweeper truck function : isuzu SWEEP TRUCK transmission between the auxiliary engine and the fan is equipped with an automatic clutch, which can ensure the automatic separation of the auxiliary engine from the fan during no-load start and shutdown, reduce the impact on the auxiliary engine, and improve the working reliability and service life of the auxiliary engine.

How to do when the sweeper truck has obstacle

In case of any obstacle during disk sweeping, it has the function of automatic avoidance protection and automatic reset. In case of any obstacle, it will retract automatically and return automatically when crossing the obstacle.

The rotating speed of the sweeping disc can be adjusted according to various cleaning conditions to ensure good cleaning effect under various pollution conditions

Advance

Advanced and efficient special fan and fully floating suction nozzle that can be leveled automatically with the road surface are adopted, which has good cleaning effect and long service life.

Isuzu 100p sweeper side

When Isuzu 100p sweeper is working, the rear arrow light is on to prompt the rear vehicle to avoid

Isuzu 100p road sweeper is finished, the vehicle is lifted and the garbage is poured out

Isuzu 100p sweeper configuration

Chassis model: ql1070a5hay
Engine model: 4kh1cn5hs
Engine power: 96kw
Overall dimension: 6190 × one thousand nine hundred and ninety × 2590mm
Working width: 2.6m
Suction particle size: φ 120mm。
Water tank volume: 1.5m ³
Volume of dustbin: 4m ³
Maximum working energy: 13000 ㎡ / h-52000 ㎡ / h.
Top standard configuration: with 4 sweeping plates, Jiangling Isuzu auxiliary engine, Heqi motor, Siemens control switch, Taiwan solenoid valve group, stepless speed change automatic clutch, maintenance free centrifugal automatic fan, stainless steel dustbin, tail led arrow indicator, manual pump emergency system and garbage lifting and self unloading function.