cold reefer truck Products Technical Specification

Heavy duty carborundum grit, non slip polyester resin floor, reinforced with min 1000 grm combination glass fiber matting coved to the walls to provide a watertight pan.

,refrigeration temperature reached -18°C to 0°C

floor, Mark lamp at the four (4) corners f the

body,Room lamp will be provided inside the cabin.

2. Material:FRP and color steel and Polyurethane foam insulation

3. Thickness:8cm

4. Left hand drive

COLD ROOM TRUCK Equipment

Floor –heavy-duty carborundum grit, non sleep polyester resin floor, reinforced with minimum1000 grm combination glass fiber matting coved to the walls to provide a water tight pan

3.Rear frame – welded stainless steel (DP1 304) rear frame. Rear frame header incorporated rainwater canopy. Welded stainless steel (DP1 3040) side door frame.

4.Double rear doors- double rear doors with min 25 mm stainless steel door furniture and refrigeration furniture door seals. Door wear plated, door buffers and stainless steel door retainers are must be included.

5.Refrigeration unit –one carrier or equivalent, diesel powered refrigeration unit 3 PH mains standby to operate at temperature down to -18 degree© fitted with 12 volt battery and fed from the vehicle own fuel tank.

6.Internal Fittings:-In cab digital temperature read out 2 rows heavy duty, stainless steel load lock track,2 reassessed, cab-operated interior lights. Aluminum fridge evaporator guard .PVC Thermal strip curtains to rear doors, PVC Thermal strip curtains to side doors, 1 row of 225mm anodized aluminum rub rail.

7.External fittings:-1. Mudguard and spray suspensions, aluminum cab catwalk, aluminum bulkhead access ladder, anodized aluminum side guard system, under run bar, rubber chocolate block buffers, side and rear marker lights, side and rear marker plates, single folding stainless steel and aluminum step, pull-out side step

chilly truck Optional Configuration (√:Standard Equipment o:Optional ×:Not Available)